Induction heating elbow machine installation process detailedelbow machine,tee machine,elbow bevelling machine supplier

Induction heating elbow machine installation process detailed

Induction heating elbow machine manufacturers Cangzhou Aocheng Machinery Equipment co., LTD
Device: 1. Induction heating elbow machine pull out elbow machine clamping die fixed centering shaft
2. put the clamping die of the induction heating elbow machine, and then insert the fixed mandrel into it.

Adjustment:
1. The clamping die seat of the induction heating elbow machine is fixed and loosened, the elbow machine is placed in the manual form, the clamping pipe button is pressed to the end of the clamping mode. (at the moment, there is a gap between the clamping rings of the wheel die, and the clamping seat can be adjusted by adjusting the screw rod
2. adjust the clamping base and adjust the screw, so that the clamping die and the wheel die are completely closed
3. press down the clamping button to make the clamping die retreat, and the elbow machine will rotate the clamping screw clockwise in about 1/2-1/4 circle
4. lock the clamping die holder nut again.

Cangzhou Aocheng Machinery Equipment co., LTD.
Address : Bobei Industrial Zone, Mengcun Hui Autonomous County, Cangzhou City, Hebei Province, China
Mobile : +86-15230713671
Fax : +86-317-6218625
E-mail : 15230713671@163.com
Skype : zhiguang.wu

About Us　|　 Products　|　 Order Online　|　 Contact Us