Pipe expanding machine is a kind of machine equipment for expanding pipes. Its operation requires experience and technology, in order to ensure the stability of the operation process, it is necessary to comply with certain operating procedures. The following is the stable technical operating rules of the pipe expanding machine:
1. Stability procedures
In the process of operating the pipe expansion machine, the following stability procedures must be observed:
1. Before the operation, check whether the machine is running properly and whether the power cable is properly grounded.
2. You must wear protective articles such as goggles, hand gloves, ear muffs to avoid noise and dust caused by machine work.
3. The operator should not wear loose clothes and long hair to avoid being wound by the rotating parts of the machine.
4. Direct contact with the moving parts of the machine is prohibited, so as not to be involved in the inside of the machine.
5. During the operation of the machine, it is forbidden to reach into the inside of the machine, and it must be operated after the machine stops running.
6. In the process of operation, it is forbidden to change the control program or parameter Settings of the machine at will, and it must be operated in accordance with the process standards.
Second, operating procedures
The operation of the pipe expanding machine requires experience and technology, and compliance with the operating rules can successfully complete the operation task.
1. Prepare for startup
Before the operation of the machine, the following preparations need to be made:
(1) Check whether all parts of the machine are normal, such as power lines, air pipes, etc.
(2) Confirm that the power supply and air source of the machine are normal, and check before opening the machine.
2. Start the machine
Before starting the machine, the control program should be set, the parameters should be set according to the process requirements, and then press the start button to operate.
3. Operation control
The control mode of the pipe expanding machine is generally CNC control, which must be operated according to the process requirements. The operator must be familiar with the setting of the parameters of the machine and master the operation skills.
4. Stop operation
During the operation of the machine, if there is a fault that needs to be stopped for maintenance, the stop button should be pressed to stop the machine. Before stopping, check whether the machine is normally powered off, clean up the internal residue of the machine, and turn off the power.
5. Maintenance
As a mechanical equipment, the pipe expanding machine needs to be maintained in daily operation to ensure the stability and long-term use of the machine. Common maintenance measures include cleaning, refueling, replacement of faulty parts, etc.
In short, the operating procedures of the pipe expanding machine need to follow strict operating requirements and stability procedures to ensure the stability of the machine and the stability of the operator. The operator needs to master rich experience and technology, understand the setting and control mode of various parameters, and ensure the normal operation of the machine before each operation.
For more knowledge about pipe expanding machine, please pay attention to our website: http://www.fitting-equipment.com
| 