| Structure and color of three-way machine
Tee machine equipment will not be deformed during operation. The welding parts of tee machine are tested by nondestructive testing. A T-shaped slot is arranged above and below the table of the three-way machine for installing the mold. The three-way machine is equipped with a dead point locking device on the slide block to prevent the slide block from sliding. The power structure of the three-way machine is placed on the top of the machine, and the top of the fuselage is provided with a smooth platform and a fence. The slider guide rail of the three-way machine is lubricated by non-recovery type automatic thin oil, and there is no oil box and fault display device. The body color of the tee is dark gray and green. We can also customize various colors according to customer's requirements.
Three-way molding machine technology is to use the tube billet as raw materials, through the application of liquid pressure in the cavity of the tube and the axial load, so that the plastic deformation occurs in the cavity of the mold, the tube wall and the inner surface of the mold fit, so as to get the required shape parts forming technology. For the products with small fillet size and difficult to form, segmented pressure molding is often used, that is, the tube expansion is completed with small pressure, and the larger fillet is formed. At this time, the wall thickness remains relatively uniform, and then the pressure is increased to force the pipe fitting to fit the mold. The material at the fillet produces tensile deformation, the pipe wall is thinened, and the required tee is finally obtained.
Titanium alloy tee machine, today our company successfully made qualified titanium alloy tee with a new process, the new process only needs to be formed once, the original need for four times, greatly reducing the manufacturing cost of titanium alloy Tee, so that our titanium alloy tee machine technology to a higher level.
|
