• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

Pipe bender is widely used in modern production of pipe bending equipment, can be used in petroleum, chemical and other pipeline safety engineering use. There are some faults in the process of rubbing the pipe bender, which need to be stopped for various tests and different operations. When checking the pipe bender, it is first necessary to check whether the steel ball in the switch falls, and switch according to the operation and detection of the manual. Check the oil tank and hydraulic fluid are normal and loosen the bolts on the refueling port. Replace the sealing coil in the plunger pump.

The little knowledge of the pipe bender includes the introduction of hydraulic oil circuit of the pipe bender, the introduction of hydraulic components, the maintenance of the pipe bender and so on.

The pipe bender is used for the formation of pipe bending. The main power is hydraulic cylinder or chain drive, and the heating mode is medium frequency heating

The pipe bender itself is a non-standard product, so there is no specific specifications and models, we can directly customize according to customer requirements

Bend diameter from 21mm - 1620mm, wall thickness from 3mm - 100mm we can do

Pipe bending machine can be used for carbon steel, alloy steel, stainless steel pipe of any material

Pipe bender can be divided into two types: hydraulic intermediate frequency pipe bender and chain intermediate frequency pipe bender

Hydraulic oil circuit of pipe bender: check the oil level of mailbox on time every week. If the oil level is lower than the oil window, add hydraulic oil. When the pipe bender works to a certain time, it needs to change the oil in time and clean the oil tank. The hydraulic parts of the pipe bender should be changed every time, so that the grease of the pipe bender and the air filter on the oil tank can be changed once a year.

Maintenance of the pipe bender: the pipe bender needs a maintenance at 45 days, which can prolong the service life of the pipe bender. The bending machine produced by our company has the advantages of simple operation, high production efficiency, low cost and long service life.