简体中文 | English
SEARCH:
Home About us Products Press Room Service Certificate Case Show Technical Support Contact Us
You are located : Home > Press Room > Industry News >
Press Room
- Company News
- Industry News
- Products News
- faq
ProductList
Elbow Machine
Pipe Bending Machine
Mid-Frequency Induction Pipe Bending Machine
Mid-Frequency Induction Pipe Expanding Machine
Pipe Expanding Machine
Tee Machine
Hydraulic Press machine
Bevelling machine
JCO JCOE Welded Pipe Production Line
Straightening Machine
Steel Pipe Hydrostatic Pressure Tester Machine
Plate Rolling Machine
Shot Blasting Machine
Accessories
 
 
 
Industry News
 
Notes and control system of hydraulic pipe bender
Time:2021-12-10 10:10:55  Clicks:
Notes and control system of hydraulic pipe bender

The matters needing attention in the operation process of the hydraulic pipe bender are: the hydraulic pipe bender must be installed smoothly and firmly before use, and the required open space device on the railing in production. Before bending, the hydraulic pipe bender should first run in no-load, and after confirming normal operation, the pipe is covered with mold. No load test is allowed. Bending steel pipes beyond the diameter and wall thickness specified by pipe bender is strictly prohibited. Tube mould must be selected according to machining pipe diameter and placed in sequence. Oil or lubricant shall not be placed between the pipe and the pipe mold during the hydraulic pipe bender. Clamping parts, guide plate supporting structure should be replaced in time in the direction of the bend. The electrical part should be grounded or zeroed as required. Operators need to take good care of machinery, rotating parts regularly refueling, regular maintenance. The above is our company's summary of the hydraulic pipe bender in the process of operation need to pay attention to matters.

Hydraulic pipe bender

Hydraulic pipe bender is designed and manufactured for large diameter pipe engineering and for the ever-increasing market demand of various specifications of pipe bender.

The bending radius and Angle of the bend can be adjusted according to the user's requirement.

The equipment is made of seamless steel pipe, welded steel pipe or coiled steel pipe.

The specification of hydraulic pipe bender: we can do the bending diameter from 21mm to 1620mm, the wall thickness from 3mm to 100mm

The bending radius of the elbow shall be greater than or equal to 3D, and the elbow Angle shall be adjusted arbitrarily within a certain range.

The stroke of the main cylinder is determined according to the caliber and bending radius of the steel pipe bend (provided by the customer).

Hydraulic pipe bender can be used for carbon steel, alloy steel, stainless steel pipe of any material

The hydraulic pipe bender mainly consists of: frame, main cylinder support plate (including main cylinder), movable push plate, elbow clamp platform, elbow rocker arm, rocker arm rail, rocker arm shaft, elbow combination clamp, intermediate frequency transformer support, intermediate frequency power supply, intermediate frequency transformer, electrical control system and so on.

Quick to find the product information
 
Contact us
Cangzhou Aocheng Machinery Equipment co., LTD.
Address : Bobei Industrial Zone, Mengcun Hui Autonomous County, Cangzhou City, Hebei Province, China
Mobile : +86-15230713671
Fax : +86-317-6218625
E-mail : 15230713671@163.com
Skype : zhiguang.wu
About Us |  Products |  Order Online |  Contact Us Copyright © Elbow Machine,Elbow Forming Machine,Tee Machine All Rights Reserved manage