| How to beveling machine beveling processing
The beveling machine can be processed and shaped according to the specifications and models of different pipe fittings, as well as the process standard requirements of the beveling machine, using special lathe and other machinery to process and shape the semi-finished products, so that the pipe fittings meet the standard requirements, and within the prescribed range according to the size.The inspection department of our company inspects the products according to the standard tolerance requirements of size and shape.The main emphasis is the elbow groove processing mold.
Whether lathe or beveling machine, straight pipe is easy to fix, beveling is easier to process.Elbow groove itself is difficult to fix, sometimes there are a lot of unqualified slope out.Therefore, the company specially designed and produced a set of car mouth mold matching with various elbow.In this way, the problem that turning tool and elbow can not be rotated is successfully solved, and the quality and efficiency are greatly improved.
Beveling machine in the process of operation need to pay attention to the tool wear
In the operation of the beveling machine, first of all, the lubrication regulations should be strictly followed before the operation of the oil, and keep the appropriate amount of oil in the gear chamfering, the oil circuit is smooth, the oil label is eye-striking, the oil cup, linolene felt and other clean.In the inspection of safety devices and electrical appliances, whether each control handle is safe, reliable and sensitive, empty operation for 5 minutes to control, ensure that it is in good condition before application.
After the beveling machine starts, the operator should usually pay attention to the operation condition of each part, the temperature rise and lubrication, etc. If there is any particular, stop immediately and eliminate the obstruction.
After the operation of the beveling machine, it is necessary to check and clean the equipment garbage, do a good job of the daily care of the pipe bender, turn all kinds of switches to zero, cut off the power supply, and reach the clean, clean, lubrication and safety.Accurately adjust the height of the working table, accurate device and adjust the tool, so that the top of the iron knife from the workpiece tooth root 0.1-0.2mm, and tensioning unchanged, the correct choice of cutting, try to cut a tooth that pass can continue to work, and usually check the tool fastening and wear status.
2406-2506.
|
