The elbow machine can manufacture various types of elbows, including different bending angles, curvature radii and pipe diameters. It usually consists of a frame, hydraulic system, bending mold and control system.
First, the frame of the elbow machine is the support structure of the equipment, usually made of steel, with enough strength and stability to withstand the force and pressure during the bending process. The design of the frame should take into account the composition of the bending cylinder, pipe and fuel tank. The hydraulic pump delivers hydraulic oil to the hydraulic cylinder by pressure, thus generating enough force to move the bending mold.
The bending die of the elbow machine is the part used to achieve the shape of the elbow. It is usually made of steel and has the required radius of curvature and bending Angle. Different bending dies can be replaced according to different pipe diameters and bending requirements.
The control system is an electronic device used to control the operation of the elbow machine. It usually consists of an electrical control cabinet and a touch screen. Through the touch screen, the operator can set parameters such as the desired bending Angle, pipe diameter and curvature radius. The control system can also monitor the operating status of the equipment and diagnose faults.
The operation steps of the elbow machine are usually as follows:
1. Adjust the bending die and fixture to ensure that they match the diameter and shape of the pipe.
2. Place the pipe to be bent in the fixture and secure it.
3. Set the required bending Angle, pipe diameter and curvature radius through the control system.
4. Start the hydraulic system, and the hydraulic pump begins to provide power.
5. The control system moves the bending mold to the appropriate position through the hydraulic system to make the pipe begin to bend.
6. When the pipe reaches the required bending Angle, stop the operation of the hydraulic system.
7. Remove the fixture and take out the bent pipe.
Elbow machine can manufacture various types of elbow, such as 90 degree elbow, 45 degree elbow, 30 degree elbow and so on. It is widely used in petroleum, chemical industry, water supply, drainage, heating, ventilation and other fields.
In short, elbow machine is an important pipe making equipment, through the combination of hydraulic system and bending mold, can manufacture various types of elbow, to meet different pipeline layout and design requirements.
| 