Elbow machine is a common mechanical device used to bend metal pipes or pipes. Its main function is to change the direction or Angle of the pipeline to adapt to different pipeline layouts and pipeline system requirements. In various industrial fields, such as petrochemical, pharmaceutical, food processing, elbow machine plays an important role. The following will be detailed about the real use of the elbow machine 1. Preparation
Before using the elbow machine, the user needs to prepare. First, determine the size, material and bending Angle of the pipe to be bent. Secondly, check the working state of the elbow machine to ensure that the power supply is connected, the lubricating oil is sufficient, and the components are not abnormal. Finally, the required tools and equipment, such as measuring tools, fixtures, support frames, etc.
2. Install the pipe or pipe that needs to be bent to the elbow machine, usually by clamping the pipe through a clamp or jig. Make sure the pipe is securely secured to prevent movement or deformation during bending.
3. Adjust the elbow machine
According to the desired bending Angle and pipe size, the parameters and Settings of the whole bend machine. There are usually several key parameters to adjust:
- Bend Angle: Set the desired Angle by adjusting the bend Angle dial or electronic control panel on the bend machine.
- Bend radius: Adjust the bend radius dial or electronic control panel on the bend machine according to the pipe diameter and bend Angle.
- Bending speed: According to the pipe material and pipe wall thickness, adjust the bending speed of the elbow machine to stabilize the process.
4. Perform bending processing
According to the set parameters of the bending machine, the bending process begins. In the process of processing, the following points need to be noted:
- Monitor the bending process of the pipe to ensure the accuracy of bending Angle and bending radius.
- According to the need, the pressure sensor or force sensor can be used to monitor the working pressure or force of the elbow machine to ensure that it is in a stable range.
- If multiple bends need to be made continuously, bending dies or fixture fixtures can be used to improve production efficiency and machining quality.
5. Check and adjust
After the bending is completed, the bent pipe needs to be inspected and adjusted to ensure that it meets the design requirements and standards. Measuring tools such as calipers, protractors, etc. can be used to measure the accuracy of the bending Angle and bending radius. If the deviation is found, it can be corrected by adjusting the parameters of the elbow machine or re-bending.
Sum up
Elbow machine is a very important processing equipment, which can bend metal pipes to adapt to different pipeline layouts and needs. When using the elbow, it is necessary to prepare, adjust the parameters and Settings of the elbow machine, perform bending processing, and perform inspection and adjustment. Reasonable and correct use of elbow machine can improve work efficiency and processing quality.
For more knowledge about elbow machine, please pay attention to our website: http://www.fitting-equipment.com
| 