| Multi-function elbow machine operation flow
Multifunctional elbow machine is a kind of mechanical equipment widely used in industrial production, which can bend, cut, punch and other operations on metal pipes. The following is the operation process of the multi-function elbow machine, and describes its use and precautions in detail.
1. Prepare
Before performing any operation, first ensure that the multi-function elbow machine is in a stable state and connected to the power supply. Check the flatness of the table to ensure that there are no obstacles on its surface. Check the lubrication system of the machine to ensure that it is working properly. Verify that the tool and fixture of the machine are installed and in good condition.
2. Adjust the bending Angle
Adjust the bending Angle of the multi-function elbow machine as required. Usually, the machine will have an Angle adjustment handle or button, by adjusting it, you can change the bending Angle. Adjust the Angle to the desired value according to the specific work requirements.
3. Locate the workpiece
Place the workpiece to be processed on the work table and hold it in place using a clamp. Ensure that the workpiece is stable and will not move due to the vibration of the machine. Note that the position and Angle of the fixture should match the Angle of the bending machine to ensure that the workpiece can fully contact the bend when bending.
4. Start bending
After confirming the correct position of the workpiece and fixture, press the start button to start bending. The multi-function elbow automatically performs the bending operation. During the bending process, the state of the workpiece and fixture should be observed at all times to ensure that its position is stable.
5. Cut and punch holes
If you need to cut or punch the workpiece, you can do it after bending. By changing the tool and adjusting the position of the workpiece, the cutting and punching functions are realized. Pay attention to stability when cutting and punching to ensure correct operation and avoid injury.
6. Complete the operation
After all operations are completed, stop the operation of the multi-function elbow machine and turn off the power supply. Clean workbenches and machines, organize and store tools and fixtures. Ensure cleanliness of machine and surroundings.
Operation precautions:
- During operation, follow the relevant stability specifications, wear personal protective equipment, such as gloves, goggles, etc.
- When adjusting the Angle, changing the tool and fixture, make sure that the machine has stopped running and unplug the power to avoid accidents.
- During the operation, always pay attention to the state of the workpiece and fixture to ensure that it is firmly fixed to avoid the workpiece from detachment or deformation.
- When cutting and punching, it is necessary to choose the appropriate tool and speed to ensure the quality and efficiency of cutting and punching.
- Check the lubrication system of the machine regularly to keep it working properly and avoid machine failure due to lack of lubrication.
- In the process of operation, to keep the machine and workbench clean, timely clean chips and waste to ensure the normal operation of the machine.
In SUMMARY:
The operation process of the multi-function elbow machine includes preparation work, adjusting the bending position of the workpiece, starting bending, cutting and punching, and completing the operation. Pay attention to safety during the operation, ensure that the workpiece is firmly fixed, choose the right tool and speed, and keep the machine and the surrounding environment clean. These operating procedures and precautions can help users use the multi-function elbow machine correctly and efficiently.
For more knowledge about elbow machine, please pay attention to our website: http://www.fitting-equipment.com
| 