Elbow machine is a commonly used pipeline processing equipment, mainly used for bending the pipeline. Because the pipeline often needs to beat around the bush in practical applications, the application range of the elbow machine is very wide. With the development of industrial automation, elbow machines have become an indispensable part of modern industry. During the use of the elbow machine, it is necessary to ensure its normal working state, and it is also necessary to pay attention to cleaning the elbow machine to ensure its long-term service life.
First, the work flow of the elbow machine
1. Prepare
Before using the elbow machine for pipeline processing, it is necessary to prepare the pipeline to be processed. First of all, it is necessary to choose the appropriate pipeline material according to the actual needs, and then cut and trim, so that its length and diameter meet the requirements. When performing this step, it is necessary to pay attention to maintaining the roundness of the pipeline and the smoothness of the surface to avoid deviation during processing.
2. Set parameters
Before processing the pipe, the processing parameters of the elbow machine need to be set according to the material, thickness, diameter and other parameters of the pipe. These parameters include bending radius, bending Angle, processing speed, push rod strength, etc., which need to be adjusted according to the specific situation. When setting parameters, it is necessary to select the appropriate working mode according to the actual situation, such as manual mode or automatic mode, to ensure the quality and efficiency of processing.
3. Processing operation
After setting the parameters, the processing operation of the pipeline can begin. In the processing process, it is necessary to pay attention to maintain the stability and bending accuracy of the pipeline, and adjust the processing parameters in time to ensure that the processing quality meets the requirements. In the bending process, it is necessary to pay attention to keep the working environment clean and avoid stability accidents.
4. Check and trim
After completing the processing operation of the elbow machine, it is necessary to check the processing quality. These checks include the bending Angle of the pipe, bending radius, diameter change, and surface smoothness. If there is any deviation or non-compliance, it is necessary to repair it in time to ensure the quality and use effect of the pipeline.
Second, cleaning process of elbow machine
1. Clean the exterior surface
The first step in cleaning the elbow machine is to clean the external surface. These surfaces include machine bodies, control cabinets, operating panels, etc. First of all, you can use a clean towel or brush to wipe the dust and dirt on its surface. You can then clean corners and small areas with a soft brush to remove residual dirt and dust.
2. Clean internal components
Cleaning the internal parts of the elbow machine is the key to ensure the normal operation of the machine. When cleaning the internal parts, you need to first turn off the power of the machine and disassemble the shell of the machine. Then you can use advanced tools and cleaning fluids for cleaning, including spraying, brushing, scrubbing, vacuuming and other methods of cleaning fluids. It should be noted that during the cleaning process, do not damage the parts and electrical components inside the machine.
3. Clean the processing area
After the elbow machining is completed, the processing area needs to be cleaned. These areas include the processing platform, fixtures, molds, etc. When cleaning, it is necessary to first remove the remaining pipes and waste materials, and then use the cleaning liquid for cleaning and wiping. It should be noted that the choice of cleaning fluid should be selected according to the characteristics of the processing material and the requirements of the machine to avoid damage to the machine and the processing material.
4. Maintenance
After the cleaning of the elbow machine is completed, the machine needs to be maintained and maintained. These tasks include lubrication, tightening bolts, adjusting machine parameters, etc. It should be noted that the maintenance work should be carried out in accordance with the operation instructions of the machine to ensure the normal operation and service life of the machine.
In short, the elbow machine is a commonly used pipeline processing equipment, and its working and cleaning process is very important to ensure the processing quality and the service life of the machine. It should be noted that when machining and cleaning elbow, the corresponding operating specifications and attention to stability should be followed. For more knowledge about elbow machine, please pay attention to our website:
http://www.fitting-equipment.com
| 