简体中文 | English
SEARCH:
Home About us Products Press Room Service Certificate Case Show Technical Support Contact Us
You are located : Home > Press Room > Company News >
Press Room
- Company News
- Industry News
- Products News
- faq
ProductList
Elbow Machine
Pipe Bending Machine
Mid-Frequency Induction Pipe Bending Machine
Mid-Frequency Induction Pipe Expanding Machine
Pipe Expanding Machine
Tee Machine
Hydraulic Press machine
Bevelling machine
JCO JCOE Welded Pipe Production Line
Straightening Machine
Steel Pipe Hydrostatic Pressure Tester Machine
Plate Rolling Machine
Shot Blasting Machine
Accessories
 
 
 
Company News
 
Pipe bender equipment structure and pipe bending technical parameters
Time:2021-05-21 08:17:26  Clicks:
Pipe bender equipment structure and pipe bending technical parameters

Pipe bending machine equipment structure: the guide frame, main cylinder and the plate, pushing plate, pipe clamp device, bend the rocker, rocker arm, bend an axle shaft, bend combination clamp plate, medium frequency transformer adjusting device, frequency transformer, intermediate frequency power supply, intelligent control system, work station (touch screen), cooling water circulation system, etc.Technical parameters of pipe bender: the bending raw materials used by pipe bender are seamless pipe, straight seam welded pipe, etc.The bending radius of the elbow must be greater than 2.5D (the following 2.5D elbow push-making machine manufacturing process), intelligent control of the elbow Angle, (the Angle of the elbow should be set arbitrarily within a certain range according to the need).The diameter, wall thickness and stroke of the main cylinder can be customized according to the maximum diameter and bending radius of the elbow.

If the medium frequency pipe bender breaks down, it should be repaired in time

When the intermediate frequency pipe bender breaks down, it should be repaired in time: the wear level of the important parts of the pipe bender in transmission is limited, and there are also yaw, very noise, shock and shaking signs.Pipe bender in the steering wear gap is too large, control obstruction, transmission gear and shaft wear damage is serious, difficult or often jump shift, brake mechanism severe wear, brake performance degradation or failure, can not be mediated.The bending frame body is deformed or cracked, the working equipment is worn seriously, the operation is hindered, the normal things can not be completed, the accuracy of the things can not meet the requirements, the moving gear is worn seriously, the pipe bender can not be operated and run normally.

3301-3306.

Quick to find the product information
 
Contact us
Cangzhou Aocheng Machinery Equipment co., LTD.
Address : Bobei Industrial Zone, Mengcun Hui Autonomous County, Cangzhou City, Hebei Province, China
Mobile : +86-15230713671
Fax : +86-317-6218625
E-mail : 15230713671@163.com
Skype : zhiguang.wu
About Us |  Products |  Order Online |  Contact Us Copyright © Elbow Machine,Elbow Forming Machine,Tee Machine All Rights Reserved manage