• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

The structure of the four-cylinder elbow push machine is in accordance with the outer diameter and wall thickness of the production required by the user, and the elbow push machine is set with the power of the medium frequency heating power supply, the diameter and shape of the cylinder, and the number of cylinders.

4 cylinder elbow pushing machine factory supporting: elbow pushing machine, hydraulic pump station, medium frequency power supply, motor control cabinet, operation table, compensation resonant capacitor cabinet, water cable, reactor and other components.

The mould and medium frequency induction heating coil of the four-cylinder elbow pushing machine are customized according to the products produced by customers.

The prepared raw material pipes are sheaths at the core of the mold, intermediate frequency induction is added to the hot-wire trap at the end of the steel pipe and the core of the mold to push the elbow, the cooling water pump is turned on, the intermediate frequency power is turned on to heat the raw material pipes to about 800°, the pushing machine is turned on, and then the elbow is pushed.Intermediate frequency power supply, intermediate frequency induction heating coil, compensation capacitor, water cable, reactor and other components need circulating water cooling.

The main use of elbow push machine and can be produced Angle

Elbow push machine produced by the elbow is used for gas, liquid transportation of various pipeline projects, the problem of pipe fittings and the demand for design and manufacture.

Elbow push machine adopts raw material pipe, seamless steel pipe, welded steel pipe and coil steel pipe.Elbow push machine in the production of products is divided into multiple specifications according to the size of the diameter of the elbow, the product range is 21mm-1620mm wall thickness: 3-120mm Angle is divided into: 45 degrees.90 degrees.180 degrees and the client needs other angles.At the same time according to customer requirements and specifications to make different elbow push machine.

The company mainly produces elbow pushing machine, elbow machine, tee machine, pipe expanding machine, diameter expanding machine, press, beveling machine, pipe bending machine and other equipment.All the above equipment customized in our company, our company will be delivered in about 2 months.Welcome new and old customers to visit our company.

2503-2507.