• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

Tee - way forming machine is a special hydraulic press for making tee - way of carbon steel and stainless steel pipe material, suitable for extrusion molding of tee - way pipe fitting joint of various specifications to change the position of side cylinder, can process and manufacture tee - way pipe joint of 90 degrees, 135 degrees and other angles.The diameter of tee is 21mm-630mm, and the wall thickness is 3mm-20mm. I can do all of them.The hydraulic system of the three-way molding machine is a hydraulic power mechanism installed on the top of the fuselage, which is composed of pump, motor, cartridge valve integrated block, oil tank, etc. The power mechanism includes oil filtration, oil temperature and oil level display and other devices.The output flow of the main oil pump is constant power and can change with the change of pressure.The structure of the three-way molding machine is the overall frame type fuselage optimization design to ensure the strength, the welding site for non-destructive inspection, after welding operation aging treatment, to ensure that the stress is completely eliminated, no deformation occurs in the use of the equipment.The three-way machine is arranged with a T-row groove below the slider and above the worktable, which is used to install the mould.The dead-point locking device on the slide block prevents the slide block from slipping.The power mechanism is arranged on the top of the machine, and the top of the fuselage is provided with a safety platform and a fence.Slider guide rail adopts non-recovery type automatic circulation thin oil smooth, and equipped with oil box and fault display device.

The hydraulic power mechanism is installed above the fuselage, which is composed of pump, motor, cartridge valve integrated block, oil tank, etc. The power mechanism includes oil filtration, cooling, oil temperature and oil level display and other devices.The main oil pump is a constant power input plunger pump, and the output flow can change with the change of pressure.

Electromechanical air control system of cold push tee:

The cold push three-way machine is equipped with an independent electrical control cabinet, and the main operation button station is suspended on the fuselage.

Cold push tee machine adopts PLC programmable controller.

The cold push tee electromechanical source is AC380V, 50Hz;Control power supply is AC220V;The power supply of each valve solenoid is DC24V.

The company mainly produces three - way machine, elbow machine, pipe bending machine, pipe expanding machine, press, beveling machine and other above all pipe fittings equipment supporting mold.

The company's production of three - way aircraft exported to Malaysia, Turkmenistan, India, Russia, India and other countries.

1502-1603.