| The explanation of automatic medium frequency pipe bender
The medium frequency pipe bender is equipped with standard guide mold auxiliary pushing device, and is designed with independent pressure and speed adjusting knob, which can be easily adjusted to meet the needs of the bending pipe, making the bending work of heavy and high difficulty easy to do.Such as small bending radius of stainless steel pipe bending or thick pipe bending.In line with the principle of dynamic mechanics of high rigidity mechanical structure design and precision technology level, in both structural strength, the simple bending hand and bending head design to provide the maximum bending space, so that the interference range of the machine to the minimum.The structure is stable when bending, it can easily achieve the relatively difficult bending work, with high stability and long operating life.
Material: stainless steel, tube thickness :3.5 (mm), radius of curvature :101.6 (mm), model :A100TNCB, weight :4500 (kg), NC single axis hydraulic automatic pipe bender, with PLC controller can edit and store 10 kinds of bending Angle for automatic bending.
The medium frequency pipe bender has the function of automatic pipe through the core lubrication. Before each bending, it can automatically inject the required bending lubricating oil into the pipe, which can improve the bending quality, increase the life of the mold, and simplify the manual adding procedures.
The intermediate frequency pipe bending mechanism adopts shaft joint locking design, which can ensure greater clamping force and uniform bending quality compared to the general simple cylinder pushing design.Medium frequency pipe bender has the function of slowly receding, according to the program set the receding action time of the pipe through the core, can avoid the protrusion phenomenon of the pipe appearance caused by the fixed position of the pipe through the core, so as to improve the appearance quality of the pipe.
Matters needing attention when lubricating hydraulic pipe bender
Before refueling the hydraulic pipe bender, it is necessary to clean the internal debris of the tank and clean it. Also, it is necessary to check whether the oil filter net is intact to ensure that the filtration function can be completed normally.After the end of the oil can be gradually poured into the tank, until the oil standard rules at the cover of the tank can be.The pipe bender needs refueling in the process of use, but this is not a brief operation. There are many matters that need special attention, otherwise the effect will be affected.If you have any questions, just as well in accordance with the following matters operation, will be successful.
Because good hydraulic oil contains a variety of additives, these additives can prevent oil decay or blocking system parts, but after long-term use, no one can ensure its efficacy, so the need for regular replacement.In addition to oil discharge and refuel from the beginning, regular replacement of the filter is also one of the actions to keep the hydraulic pipe bender system clean, so as to keep the system clean.
Timely release of hydraulic pipe bender tank of water and sediment, on the removal of impurities in the oil is very crucial, together with this, but also regularly empty the entire hydraulic system of oil, this is to completely eliminate the system of impurities, oxidized hydraulic oil and other harmful substances.After the end, the need to clean the hydraulic has been added to the system from scratch.But the refueling of the whole equipment has not been completed, and then carefully observe whether there are other parts that need refueling, such as the reducer, etc.;Then, in the final analysis, the regular oil with smooth point is selected for filling, so as to achieve abundant and smooth effect.
11011-11013.
|
