Teach you how to adjust cold forming elbow machineAccessories -Cangzhou Aocheng Machinery Equipment co

Adjust the cold forming elbow machine has the following four steps to complete:
1. The cold forming elbow machine clamp mold base fixed to relax, then the control panel in manual mode, press the clip pipe button, to die ACTS end point.(at this time the wheels have a gap between the die and mould can adjust the screw to adjust the clamp mold base.
2. Adjust the mold base adjustment screw make clip to die with wheel die completely closed.
3. Press the back button to make the die back, then die adjustment screw clockwise about 1/2-1/4 circle.
4. Then clamp mold base fixed nut lock
That is the way some adjustment cold forming elbow machine, might as well try.

Cangzhou Aocheng Machinery Equipment co., LTD.
Address : Bobei Industrial Zone, Mengcun Hui Autonomous County, Cangzhou City, Hebei Province, China
Mobile : +86-15230713671
Fax : +86-317-6218625
E-mail : 15230713671@163.com
Skype : zhiguang.wu

About Us　|　 Products　|　 Order Online　|　 Contact Us